 Balmoral |
|
Minimum roof pitch |
22.5° |
|
Headlap (minimum) |
75 mm |
|
Headlap (maximum) |
120 mm |
|
Batten spacing at maximum gauge** |
210 mm |
|
Batten spacing at minimum gauge |
285 mm |
|
Size of tile |
330 x 226 mm |
|
Covering capacity at maximum gauge |
20.5 tiles per m² |
|
Cover width |
191 mm |
|
Profile depth |
16 mm |
|
Hanging length |
300 mm |
|
Weight as laid |
43 kg per m² |
|
Weight per 1000 |
2.1 tonnes |
|
Weight per tile |
4.0 kg |
|
Weight per pallet (including pallet & packaging) |
1.1 tonnes |
|
Quantity per pallet |
480 |
|
Quantity per row/band |
40 |
|
Quantity per mini pack |
10 |
|
Quantity per layer |
120 |
|
Mini packs per row |
4 |
|
Battens per m² |
3.9m |
|
Batten size - up to 450 mm rafter centres |
38 x 25 mm |
|
Batten size - up to 600 mm rafter centres |
50 x 25 mm |
|
Nail size/type for tiles |
50 x 3.35 mm aluminium clout head |
|
Nail size/type for tile clips |
65 x 3.35 mm aluminium clout head |
Product specification is subject to change and will be updated accordingly.
* For projects where the rafters are below the minumum recommended roof pitch,
please contact our Technical Department for advice
** Clay tiles are subject to small variations in size because of drying and firing
shrinkage in the manufacturing process. Before deciding on the batten gauge and
linear coverage, the roof tiler should inspect each batch of tiles to ensure that
the correct minimum headlap and sidelap are achieved. For further guidance, download
the
Balmoral Installation Guide.
Note: unless otherwise stated, data is based on the tiles laid at minimum headlap.
Tile Fixing
Sandtoft roof tiles must be laid and fixed to comply with BS 5534: the British
Standard Code of practice for slating and tiling, and BS 8000: Part 6: the British
Standard Code of practice for workmanship on building sites.
To ensure compliance with these Standards we strongly recommend that either the
recommendations given in the Sandtoft
Zonal Method User’s Guide and Zonal tables must be followed where available or a calculated fixing specification
must be obtained using Sandtoft’s Fixing SPEC service.
For further information go to
Fixing SPEC or contact Sandtoft Technical Support on 0870 145 2021
