Minimum roof pitch	30°
Headlap (minimum)	75 mm
Batten spacing at maximum gauge**	267 mm
Size of tile	342 x 253 mm
Covering capacity at maximum gauge	17 tiles per m²
Cover width	220 mm
Profile depth	69 mm
Hanging length	308 mm
Weight as laid	40.8 kg per m²
Weight per 1000	2.4 tonnes
Weight per tile	2.4 kg
Weight per pallet (including pallet/packaging)	0.5 tonnes
Quantity per pallet	216
Quantity per row/band	36
Quantity per mini pack	N/A
Quantity per layer	72
Mini packs per row	N/A
Battens per m²	3.75 m
Batten size - up to 450 mm rafter centres	38 x 25 mm
Batten size - up to 600 mm rafter centres	50 x 25 mm
Nail size/type for tiles	50 x 3.35 mm aluminium ring shank clout head

Note: Unless otherwise stated, data is based on tiles laid at minimum headlap

For projects where the rafters are below the minimum recommended roof pitch, please contact our Technical Services for advice.

**Clay tiles are subject to small variations in size because of drying and firing shrinkage in the manufacturing process. Before deciding on the batten gauge and linear coverage, the roof tiler should inspect each batch of tiles to ensure that the correct minimum headlap and sidelap are achieved. For further guidance please contact Sandtoft Technical Services on 0844 9395 999.

Sandtoft roof tiles must be laid and fixed to comply with BS 5534: the British Standard Code of practice for slating and tiling, and BS 8000: Part 6: the British Standard Code of practice for workmanship on building sites.

To ensure compliance with these Standards we strongly recommend that either the recommendations given in the Sandtoft Zonal Method User’s Guide and Zonal tables must be followed where available or a calculated fixing specification must be obtained using Sandtoft’s Fixing SPEC service.

For further information go to Fixing SPEC or contact Sandtoft Technical Services on 0844 9395 999.

Back to Previous Page