Minimum roof pitch	35°
Headlap (minimum)	65 mm
Headlap (maximum)	N/A
Batten spacing at maximum gauge	100 mm
Size of tile	265 x 165 mm
Covering capacity at maximum gauge	60 tiles per m²
Cover width	165 mm
Profile depth	13 mm
Hanging length	245 mm
Weight as laid	78.0 kg per m²
Weight per 1000	1.3 tonnes
Weight per tile	1.3 kg
Weight per pallet (including pallet/packaging)	1.0 tonnes
Quantity per pallet	768
Quantity per row/band	64
Quantity per mini pack	16
Quantity per layer	256
Mini packs per row	4
Battens per m²	10 m
Batten size - up to 450 mm rafter centres	38 x 25 mm
Batten size - up to 600 mm rafter centres	38 x 25 mm
Nail size/type for tiles	38 x 3.35 mm aluminium clout head
Nail size/type for tile clips	N/A

Note: Unless otherwise stated, data is based on tiles laid at minimum headlap.

For projects where the rafters are below the minimum recommended roof pitch, please contact our Technical Department for advice.

Tile Fixing

Sandtoft roof tiles must be laid and fixed to comply with BS 5534: the British Standard Code of practice for slating and tiling, and BS 8000: Part 6: the British Standard Code of practice for workmanship on building sites.

To ensure compliance with these Standards we strongly recommend that either the recommendations given in the Sandtoft Zonal Method User’s Guide and Zonal tables must be followed where available or a calculated fixing specification must be obtained using Sandtoft’s Fixing SPEC service.

For further information go to Fixing SPEC or contact Sandtoft Technical Support on 0870 145 2021

Back to Previous Page